|
How
to use Nail Stickers:
1. Thoroughly clean the surface of the nail.
2. Gently peel the selected sticker design from its backing sheet, being
careful not to touch its adhesive back. (Use tweezers if
necessary.)
3. Place the selected sticker on its desired location of the nail tip or extension, and very
gently rub it to ensure full adhesion.
4. Apply a layer of quick drying topcoat (clear varnish) to the entire nail.
5. Carefully remove any excess before the top coat dries.
6. If necessary you can repeat step 4.
How
to apply Rhinestones, Confetti Shapes and Fimo Slices:
1. Thoroughly clean the surface of the nail.
2. Apply the basecoat or the basecoat & colour coat to the
nail surface.
3. Either apply the desired rhinestone, confetti shape or Fimo slice direct
onto the nail surface (use tweezers if necessary) before the varnish coat has dried
completely OR wait for the primary coats to dry and apply a
small drop of glue onto the nail in the desired position.
4. Press the decoration firmly into position, and wait about 1 minute for the glue to dry.
5. Apply a layer of quick drying topcoat (clear varnish) to the entire nail.
6. Carefully remove any excess before the top coat dries.
7. If necessary you can repeat step 4.
How
to use Nailart Templates:
1. Thoroughly clean the surface of the nail.
2. Apply the basecoat or the basecoat & colour coat to the
nail surface.
3. When the base coat is dry, apply the selected template onto
the nail.
4. Coat over the template with your desired colour, gently
remove the template sticker before the top coat has dried.
5. Apply a layer of quick drying topcoat (clear varnish) to the entire nail.
6. Carefully remove any excess before the top coat dries.
How
to use Water Decals:
1. Thoroughly clean the surface of the nail.
2. Cut out the selected decal design from the sheet of decals.
3. Place the selected decal design in a small bowl of water
and leave just for a few seconds.
4. Gently lift the decal out of the water with one finger and
slide the base paper off the decal design.
5. Carefully position the decal on the nail and ensure no air
is trapped beneath the decal. The design will take about one
minute to dry.
6. Apply a layer of quick drying topcoat (clear varnish) to the entire nail.
7. Carefully remove any excess before the top coat dries.
8. If necessary you can repeat step 6.
|
